Emerald Planet
What is the Emerald Energy Heat Pump System?
The Emerald Energy Heat Pump Water Heater is a cutting-edge hot water system that has been designed specifically for the Australian climate. It works by extracting heat from the air and pumping it into the water tank via a refrigerant cycle—a similar process to a reverse-cycle air conditioner.
The highly efficient process allows the system to deliver hot water with only a fraction of the electricity of traditional electric storage or gas systems.
Emerald Energy’s units are built for durability, noise minimisation, and peak energy efficiency, a smart choice for new installations and retrofits.
Showing all 4 results
-
Details
All-In-One Heat Pump – 220L
Supply & Install$3299NSW -
Details
Emerald All-In-One Heat Pump – 270L
Supply & Install$3399NSW -
Details
Emerald Planet Heat Pump 200L
Supply & Install$3199NSW -
Details
Emerald Planet Heat Pump 300L
Supply & Install$3699NSW
Growing Demand for Energy-Efficient HVAC Solutions
As Australian residents turn to reducing energy costs and carbon emissions, there’s also mounting pressure for energy-efficient HVAC (heating, ventilation, and air conditioning) systems.
Heating water consumes up to 25% of household energy, according to the Australian Energy Regulator (AER). By substituting a conventional system with a high-efficiency one like Emerald Energy’s heat pump, residents stand to save up to 70% in energy consumption.
Why Heat Pumps Are Now the Top Choice for New Buildings
Heat pumps have been very popular due to:
- Lower operation cost compared to gas and electric heaters.
- Government incentives and rebates from renewable energy schemes.
- Clean green operation with lower greenhouse gas emissions.
- Improved lifespan and better warranty with newer technology.
- Solar PV compatibility, assuring future-proofing.
Emerald Energy heat pumps combine these benefits with cutting-edge design to provide an elite option for city and rural homes across Australia.
Emerald Energy Heat Pump Features
Intelligent Efficiency and Performance
Emerald Energy products feature an inverter compressor and intelligent controller to optimise energy utilisation based on the current demand and environmental conditions. This ensures water heating is efficient while keeping electricity consumption at low levels.
Quiet Operation
The system is ultra-low noise, operating as quietly as 48 decibels—ideal for installation next to bedrooms or shared walls.
Anti-Freeze Protection
Built-in anti-frost technology ensures the best performance even in colder climates or winter mornings, ideal for all Australian zones.
Different Types of Models Available
Emerald Energy offers various sizes to suit different household needs:
Model | Tank Size | Ideal For | Noise Level | COP Rating |
Emerald 200L | 200 Litres | 1–3 people | ~48 dB | ~3.6 |
Emerald 270L | 270 Litres | 3–5 people | ~50 dB | ~3.8 |
Emerald 315L | 315 Litres | 5+ people | ~52 dB | ~4.0 |
All models have a smart touch controller, timer settings, and diagnostic features.
Performance Indicators and Critical Specifications
- COP (Coefficient of Performance): Up to 4.0 — i.e., for every 1 kWh of electricity consumed, up to 4 kWh of heat generated.
- Water temperature range: 35°C–60°C
- Tank material: Vitreous enamel with sacrificial anode lining
- Refrigerant: Green R134a or R290 (model dependent)
- Controller: LCD with programmable scheduling
Smart Technology Integration and Controls
Emerald heat pumps have intelligent control panels with the following advantages:
- Off-peak schedule programming of heating water.
- Energy consumption tracking for maximum efficiency.
- Remote monitoring (some models through an app).
- Alarm notification for faults and system diagnostics for faster maintenance.
The intelligent controls observe the system and learn the usage patterns within the home, as well as reduce running costs.
Cost Analysis and Savings
Initial Investment vs Long-Term Savings
The up-front cost for an Emerald Energy Heat Pump is between $2,800–$4,500 (AUD) plus installation. While more than a standard electric or gas water heater, the savings in energy typically pay back in 3–5 years.
Government Rebates and Tax Credits Available
A number of government rebates are offered on Emerald systems:
- STC (Small-scale Technology Certificates) rebates under the Renewable Energy Target (RET).
- State rebates (e.g., Victoria’s VEU or NSW Energy Savings Scheme).
These can reduce the upfront cost by $800–$1,500, depending on your location.
Warranty Coverage and Service Support
Emerald Energy offers:
- 7–10 years warranty on tanks
- 5 years on compressors
- 2 years in electronics and labour
Their network of certified installers and technicians ensures professional support Australia-wide.
Who Should Consider the Emerald Energy Heat Pump?
Emerald’s systems are ideal for:
- Environmentally conscious homeowners are looking to reduce their carbon footprint.
- Families need reliable hot water with minimal energy use.
- Property developers and landlords are wishing to future-proof buildings.
Domestic homeowners with solar on the roof—maximising the benefit of solar energy.
Which Model is Ideal for Whom?
- 200L Model: Ideal for singles, couples, or small flats.
- 270L Model: Ideal for small to medium households (3–5 individuals).
- 315L Model: Ideal for large families or households with heavy hot water usage.
If you operate several appliances at once regularly (dishwasher, washer, multiple showers), select a bigger one to avoid hot water scarcity.
Conclusion
The Emerald Energy Heat Pump Water Heater is a premium, eco-friendly Australian hot water system. It brings intelligent technology, silent running, and outstanding energy efficiency backed by big rebates and long-term reductions.
Whether you are building a new residence, upgrading an existing installation, or aiming to reduce your energy footprint, Emerald Energy is a brand that merits serious attention.